Stainless Steel Machining Parts made in China

Stainless Steel Machining Parts made in China With the deepening of people for understanding of machining, many precision parts are processed by machining at present. So stainless steel parts are difficult to machine, so various problems will be encountered during machining. What difficulties should be overcome when machining stainless steel parts? Share below what are the difficulties for machining stainless steel parts High hardness of stainless steel would be accelerated easily wear to machining tools Using to machine tools with high heat conductivity. Hardly remove chips of stainless steel part for machining. Solution, sharp cutting or edge line and wide chip breaking groove edge band could be reduced cutting pressure, thus better control of chip removal. Scrap build-up tumors are easily to cause debris to remain on the cutting edge and cause surface defects. Solution, choosing the proper processing fluid can reduce the accumulation of debris tumors. The chemical relationship between the machined tool and stainless steel parts is liable to cause work hardening from the surface leading to tool breakage and abnormal fracture. The solution, should be selected to machining tools with high toughness, high cutting edge strength and high adhesion for coating film. The most important problem in machining stainless steel parts is tool selection. Only by selecting the proper tool can the machining of stainless steel parts be as easy and simple as other iron and cast iron parts.Stainless Steel Machining Parts made in China website:http://www.licometal.com/precision-hardware-parts-processing/stainless-steel-machining-parts/