Well Accessaries factory

Well Accessaries factory Elevators Type DD Product description Model DD center latch elevators with square shoulder are suitable for handing drill collars, casing and tubings. The load ranges from 150 tons to 350 tons and the size ranges from 2 3/8 to 5 1/2. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in) Rated Capacity (short tons) DPCASINGTUBING DD-1002 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2150 DD-2502 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2250 DD-3502 3/8 to 5 1/24 1/2 to 5 1/22 3/8 to 4 1/2350 Elevators Type DDZ Product description DDZ series elevators are center latch elevators with 18 degree taper shoulder, applied in handing the drill pipes and drilling tools, etc. The load ranges from 100 tons to 750 tons and the size ranges from 2 3/8 to 6 5/8.The products shall be designed and manufactured according to the requirements in API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize(in)Rated Capacity (short tons)Remark DDZ-1002 3/8-5100MG DDZ-1502 3/8-5 1/2150RG DDZ-2502 3/8-5 1/2250MGG DDZ-3503 1/2-5 7/8350GG DDZ-350TD3 1/2-5 7/8350FRO TOP DRIVE DDZ-5003 1/2-6 5/8500HGG DDZ-500TD3 1/2-6 5/8500FOR TOP DRIVE DDZ-7504-6 5/8750 Elevators Type CDZ Product description CDZ drill pipe elevators are mainly used in the handing and hoisting drill pipes with 18 degree taper and tools in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) CDZ-1502 3/8-5 1/2150 CDZ-2502 3/8-5 1/2250 CDZ-3502 7/8-5 1/2350 CDZ-5003 1/2-5 1/2500 Elevators Type TA Product description Model TA center latch elevators with square shoulder are suitable for handling drill pipes, drill collars, casings and tubings. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) DCTubingCASING NUEU TA-352 7/8-3 1/81.05-2 7/81.05-2 7/8/35 TA-652 7/8-3 1/81.66-2 7/81.66-2 7/8/65 TA-1003 1/8-5 1/42 3/8-52 3/8-4 1/2/100 TA-1253 1/8-5 1/42 3/8-52 3/8-4 1/2/125 TA-1504 1/8-11 1/4//4 1/2-10 3/4150 Elevators Type CD Product description Model CD side door elevators with square shoulder are suitable for handing tubings, casings, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) CD-1002 3/8-5 1/2100 CD-1502 3/8-14150 CD-2002 3/8-14200 CD-2502 3/8-20250 CD-3504 1/2-20350 CD-5004 1/2-14500 CD-7504 1/2-9 7/8750 Elevators Type SX Product description Model SX side door elevators with square shoulder are suitable for handing casings in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) SX 7-16 7350-500 9 5/8 9 7/8 10 3/4 11 3/4 12 3/4 12 7/8 13 3/8 13 3/8 14 16 SX 18 5/8 - 2018 5/8 20 Elevators Type SLX Product description Model SLX side door elevators with square shoulder are suitable for handling tubings , casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications Model Size (in)Rated Capacity (short tons) SLX-653 1/2-14 1/465 SLX-1002 3/8-5 3/4100 SLX-1505 1/2-13 5/8150 SLX-2505 1/2-30250 SLX-3504 1/2-14350 Y Series Type Elevators Product description The slip type elevators are indispensable tools in handling and hoisting drill pipes, casings and tubings in oil drilling and well tripping operation. It’s especially suitable for hoisting integrated tubing sub, integral joint casing and electric submersible pump column.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize mm(in)Rated Capacity kNshort tons HYT60.3-88.9(2 3/8-3 1/2)1350150 YT33.4-88.9(1.315-3 1/2)67575 MYT33.4-73(1.315-2 7/8)36040 LYT26.7-52.4(1.05-1 1/16)18020 HYC88.9-139.7(3 1/2-7 5/8)1800200 MYC88.9-117.8(3 1/2-7)1125125 YC88.9-117.8(3 1/2-7)67575 Single Joint Elevators Type SJ(Auxiliary Elevators) Product description SJ series auxiliary elevators are mainly used in handling single casings or tubings in oil drilling natural gas drilling and cementing operation. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications SizeRated Capacity(kN) inmm45 2 3/8-2 7/860.3-73.03 3 1/2-4 3/488.9-120.7 5-5 3/4127-146.1 6-7 3/4152.4-193.7 8 5/8-10 3/4219.1-273.1 11 3/4-13 3/8298.5-339.7 13 5/8-14346.1-355.6 16-20406.4-508.0 21 1/2-24 1/2546.1-622.360 26-28660.4-711.2 30-36762.0-914.4 Single Joint Elevators Type SP(Auxiliary Elevators) Product description SP series auxiliary elevators are mainly used in handling single tubings, casings and drill pipe with taper shoulder. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) SP5’’2 3/8-10 3/45 SP12’’2 3/8-4 1/2 SP18’’2 7/8-6 5/8 Single Joint Elevators Type SJX(Auxiliary Elevators) Product description SJX series auxiliary elevators are hoisting tools for handling single pipes or working together with the professional tools CRT to move the tubulars from gate to well centre.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelSize (in)Rated Capacity (short tons) SJX-52 3/8-4 1/25 SJX-54 1/2-7 SJX-57-10 SJX-510-14 Hydraulic Elevators Type DDZH Product description Hydraulic elevators type DDZH is a center latch elevator. Through changing the bushing, it can handle drill pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers’ labor intensity effectively and improve work efficiency. It can also realize remote controlling and make the using safer and more reliable.The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelTubular Size (in)Rated Capacity (short tons) WITH 18° taper CasingDCTubing DDZH-2502 3/8-54 1/2-53 1/8-5 1/42 3/8-4 1/2250 DDZH-3502 3/8-6 5/84 1/2-73 1/8-6 3/42 3/8-5 1/2350 DDZH-5002 3/8-6 5/84 1/2-73 1/2-6 3/4/500 Hydraulic Elevator Type CDZH Product description Hydraulic elevator type CDZH is a side door elevator with double-value structure. Through changing the bushing, it can handle pipes, drill collars, casings and tubings. By using the hydraulic-controlled system, it can make the operation more convenient, reduce the workers’ labor intensity effectively and improve the work efficiency. It can also realize remote controlling and make the using safer and more reliable. The products shall be designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelTubular Size (in)Rated Capacity (short tons) WITH 18° taper CasingDCTubing CDZH-5003 1/2-6 5/84 1/2-9 5/84 3/4-5 9 3/42 3/8-4 1/2500 Air -operated Elevator Product description Air operated Elevators are conventional elevators to which power actuation has been added. This feature permits remote opening and closing of the elevators. It can meet normal working requirement in oil drilling workover and also reduce workload. They are designed and manufactured according to API Spec 8A/8C Specification for drilling and production hoisting equipment. Specifications ModelApplicable diameter of tubulars (in)Rated Capacity (short tons) DD-1504 1/8-8 5/8150 DDZ-5003 1/2-6 5/8500Well Accessaries factory website:http://www.oawellscreen.com/well-accessaries/